It's online now!
The complete catalogue for all KLOTZ premade XLR & Audio DMX adapter cables and more.
 
All our 3p. / 5p. XLR adapter cables with KLOTZ XLR connectors at a glance. Over 50 pages full of quality cables, application examples and pin assignments for our adapters that no professional case should be without.
 
The KLOTZ FlipBook premade XLR & adio DMX adapter cables - easy to navigate, hard to resist.

KLOTZ FiberLink products with the highly flexible and robust FiberFlex Ultra cable in single-mode are now also available with E2000 APC and FC APC connectors.
 
The E2000 connector is a compact connector with an automatically closing protective cap, which protects the connector from contamination and the human eye from the laser beams.
 
The high quality FC connector is characterised by its ceramic ferrules and its alignment accuracy and is preferred for precise connections.
 
Do you have special requirements? We have a wide range of options!
Do not hesitate to contact us!

Starting in September!
The popular KLOTZ C6ASEFEY installation data cable will receive an extensive update and become the new CAT7A data cable C7A12EH-D.
 
Specially designed for cabling in the secondary (riser) and tertiary (horizontal) area (floor cabling), it is used for transmitting analogue and digital signals in a frequency range up to 1200 MHz of the Ethernet standards IEEE 802.3 10/100/1000/10GBase-T, video, multimedia, PoE and VoIP.

The new C7A12EH-D has an outer diameter of 8 mm. With its AWG 22/1 construction, it is perfectly prepared for Power over Ethernet - even with higher power losses.
 
Ideally suited for installation indoors and in cable trays. By fulfilling CPR fire protection of class Dca - s1, d2, a1 according to EN50575 with low smoke and acid development as well as minimised dripping behaviour and an outer sheath made of FRNC, it offers high safety for all installations.

The CP64 cable from KLOTZ is a 4-way CAT6a multicore for stable data transmission in installations and protected mobile operation. It is designed for a frequency of 500 MHz and is therefore suitable for all applications with data transmission rates of 10 Gbit/s over a transmission distance of up to 100 m.
 
The four data lines with a characteristic impedance of 100 Ohm each have four stranded pairs with AWG 23/1 solid conductors. The double shielding (S/FTP) reliably keeps electromagnetic interference at bay. The connectors used are either the robust etherCON CAT6a plugs from Neutrik with protective cap (CP64EE), or the high-quality RJ45 plugs with metal housing from Telegärtner (CP64RR). The individual CAT cables are clearly labelled and, from a cable length of 30 m, the MultiCAT6a cable is also equipped with cable pulling sleeves and a loop for strain relief.

The CP64 MultiCAT6a network multicore is the ideal solution for all 1000Base-T and 10GBase-T applications such as NDI or Art-Net. Of course, the CP64 cable can also be used for other common applications such as Dante™, AVB, AES50 or MADI over CAT.